Replacing a Bathtub

Why are you replacing a bathtub?

Replacing a bathtub is a big job, and you should first consider why you want to replace the bathtub. Removing a bathtub is not an easy job, and you should first consider your reasons, and see if there are other options. If maintained well, a bathtub will give good service for many years.

If your existing bathtub is pink or aqua, I can see your point. In that case, reglazing might be an option. This is not inexpensive, but will eliminate the struggle of getting the bathtub out of it's existing space.

If the bathtub is white, and the bathtub surround is shabby, or the enclosure doors are in bad shape, you might be better served by installing a new surround and new shower doors. this can give a bathtub a stunning new appearance.

If you are installing a new surround, take this occasion to install an anti-scald device. This will give you the pleasure of even water temperature even if someone flushes a toilet, or the washer begins filling. Instead of water flow suddenly becoming icy or scalding hot, the water temperature will maintain evenly.

This is a great time to install a new updated faucet system which will also enhance the appearance of your bath area.

Going Green tips

With the trend toward "going green", working with what you already have could be your contribution. Considering some or all of the going green tips above could save you money and put one less thing in the landfill.

On the other hand, if the bathtub itself is in a bad state, then replacement might be the only option.

Before replacing a bathtub:

1. Shop and consider the options available.
2. Consider what bathroom in your home this is, and who will be using the bathtub.
3. Don't forget the possibility of future resale. You may have no desire to sell at this time, but life is full of change. Think about who would be the bulk of your market. For instance, if your home has three or four bedrooms, families with children would most likely be the bulk of your market.With that in mind, replacing a standard bathtub with a whirlpool in a main bath would probably not be a good idea. People with small children might be put off by this addition to a main bath.
4. Review the value and benefits of different bathtub material and different styles before making a final decision.
5. And lastly, decide how you will get the tub into it's final space. Take measurements and think where through your home the tub will have to travel to get there. Replacing a bathtub in a finished home as opposed to installing in new construction where these elements are added before walls are finished, are very different situations. You will need to find a solution before making a commitment.

Discover tips on bathtub style and other helpful bathroom remodeling advice at => http://www.bathroom-remodeling-hints.com

Miami Airport Hotels

If you are a traveler who is short on time, you could choose to stay in one of the Miami airport hotels. There are several good airport hotels in Miami where you can book your rooms directly through the website of the hotel or through their toll-free numbers. Famous airport hotels in Miami include Holiday Inn Miami, Crown Plaza Airport, and Holiday Inn Express Airport.

You can also collect more detailed information on Miami airport hotels from the Airport Hotel Guide. The guide is a popular information source, and it has been recognized by news organizations including USA Today and TSI International.

Rates for the hotels are available on a nightly basis. While searching for a good airport hotel, you might find hotels offering you a good discount. Roughly, the normal charges of the airport hotels can range from $300 upwards. For example, Hampton Inn and Suites charge an average rate of $208, while Mandarin Oriental Miamis average price is $561.

Miami airport hotels offer everything that you might need for a perfect stay. Hotels like Hilton advertise their services on their websites. For example, Hilton claims to provide in-room movies, mini-bar, hair dryer, coffeemaker, state-of-the-art alarm clock, and cable television with premium channels. It also talks of an ergonomic chair and business-friendly desk, wireless high-speed Internet access and dual-line telephones with speakerphones.

While you seek to make that business trip and lodge in one of the Miami airport hotels, you will usually experience a good ambience for business discussions and a personal serenity. And it wont be an exaggeration to say that Miami airport hotels can offer you the best mix of a business as well as a vacation trip.

Miami Hotels provides detailed information on Miami Hotels, Miami Beach Hotels, Discount Miami Hotels, Miami Airport Hotels and more. Miami Hotels is affiliated with Miami Beach Real Estate.

Building Codes - Stairway Construction

The stair building code was created for building safety. Before the building code and local city enforcement (Building Inspectors), anyone could build a house. This meant Uncle Earl who had just watched a couple of his friends build a house down the street construct some sort of a dwelling. The next step for Earl would be to help these guys for a day and now he is a professional home builder. You get the point.

Stair Building Codes create the safety needed for one of the most hazardous areas of your home. You might know someone who has fallen down a stairway?

I lived in a house I built for 15 years and I redesigned the stairs from a winder design to a T shaped set of stairs. Both sets of stairs were built using the local stair building code for my city.

Wow I could not believe how many times my family members fell down the stairs. I even fell down once. I was amazed. When I switched from the winder to the T shaped stairway there were less accidents. My point is that even using the stair building codes this is a dangerous part of your house.

Having a professional stair builder install your stairs is great advice. Take it. For example this happened to me on quite a few jobs. I get a set of plans from a architect who has been designing houses for over 40 years. I looked at the stairway to find out that he has designed a stairway that is too small for the length of this part of the home. If I build the stairs using the plans that by the way were approved from the local building department, I could have a problem.

You are probably asking yourself how does this happen. Aren't these people experienced professionals. Of course they are. They probably have the U.B.C. (Uniform Building Code) in their office somewhere. Everyone makes mistakes here and there but this is one area of the home where safety is a big concern.

Just look at it like this. The stair building code was designed to improve the safety and reduce the number of accidents while using the stairs. Over the years I have seen stairs poorly designed and constructed. These stairs create problems for the owners of the buildings not just the people that use them. Did I mention lawsuits. This is one area where a lawyer will have a field day.

As a building professional I advise you to use the stair building code first for safety and second to avoid lawsuits. Get an idea from some of the pictures I have taken over the years on problems with stair building.

Use common sense while building or remodeling your home. It goes a long way.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stair Building Articles

Categorizing Walk-in Tubs and Baths

There are so many things that we see everyday in life and get so used to that we do not even stop to think about them. No one thinks of what goes behind mundane, everyday products. No thought is spared to others who might not be as physically capable as us, for whom even simple activities are pretty difficult. The same is the case with bathtubs. Everybody is so used to getting in and out of them that no one thinks why so many types of walk-in baths and tubs are available. Spare a thought to the physically handicapped or the senior citizens. The elderly cannot get into a bathtub as easily as we do. Stiff joints and arthritis hinder them at every turn. With painful joints, every simple routine becomes an enormous task for those people.

The physically challenged or those suffering from other health related problems too have a tough time getting into or out of the bath. Nowadays at least there are walk-in tubs and baths but imagine a time before this. They had to be carried in and out of the bath! Those who needed support of the wheelchair or had other physical difficulty had to suffer a lot. They needed assistance for even taking a bath.

But thankfully, things have changed now. Now, there are tubs coming into market these days that are designed to make bath easier. They can easily get into a bath and get out of a bath as easily. There are tubs in different sizes. Safety Tubs have been a blessing to those who struggled into and out of bath. These Safety Tubs can fit into any space and come in a variety of sizes. There are walk-in baths of 513 x 303 length and breadth. This size is ideal for normal or traditional sized bathroom. If there is more space and there is preference for a spacious bath tub603 long x 323 wide can be tried. If there are space constrains, walk-in bathtub that are 513 long and 263 wide could be installed.

But this is not all. Apart from the 3 sizes of walk-in tubs, extension kits are also available. This ensures that the tubs can be fitted perfectly into custom spaces and are of required standards. Included in this can be 203 width panel that is a very good fit between the wall and the end of the tub near the wall. This panel can also be adjusted according to needs of the customers.

The wide range of walk-in tubs and baths cater a variety of needs of the people using them. Each person has a different "ideal" bath or tub according to his or her particular problem. The simplest of these are the walk-in showers or baths. These showers or baths are taken in an upright position so the one taking a bath is spared the torture of sitting down and getting up. Walk-in tubs are the other option. They have doors on the side, so there is no reason to struggle in or lift up.

Looking for information about walk-in tubs and showers

Theodor Cartman recommends different types of walk-in tubs and showers as the best option when buying.

Nailing Or Screwing Drywall

Nails versus screws who will become the winner. When drywall first came out the installers used everything from regular steel nails to galvanized roofing nails. After a short amount of time they started to develop major problems from nails popping out of the finished drywall.

Nail popping results when the nail is driven into moist lumber and as the lumber shrinks the house settles and nail can actually pop out to the walls. Hard to imagine the nail could actually pop out of the drywall as the wood was drying out.

How far the nail would actually pop out was determined by how far it was driven in to the framing studs or ceiling joists. Well pretty soon drywall installers started to use ring shank nails to eliminate this problem. This worked great but these nails were hard to drive in and would often break.

As time went on the nails improved and were made out of galvanized metal with cupped shaped heads and came in a few different sizes. The size of the nail used was determined by the thickness of the drywall. These new nails worked great and had good holding power and eliminated a lot of nail popping.

Using nails means driving them in with a hammer. If you miss the nail you damage the drywall. This seemed to be a big problem and was virtually eliminated with the screws.

Well pretty soon people started using screws which had greater holding power and pretty much nail popping. Another advantage to using screws over nails is the simple fact you need less screws than you do nails to attach the drywall to the metal or wood framing.

This means less labor installing and finishing the drywall.

There is one problem with the screws and that is they have to be set perfectly. They can not break the paper surface on the drywall but have to be set enough into the drywall so that it can be finished properly. Most screw guns have an adjustable setting used to get just the right depth for the screws installed in the drywall. But this also was a problem when screwing into a hard piece of wood you can actually snapped the screw head off, strip the screw head or break the screw.

Nails on the other hand can bend while driving them into a hard surface.

Who wins the nails versus screws while installing drywall? I have got to give it to the screws. That doesn't mean the nails just got screwed or the screws just got nailed.

I couldn't resist. I actually preferred the screws over the nails except for when nailing the drywall corner bead on. Some drywall professionals use nails to hang the drywall and go back with a screw gun and some screws to finish the job. The nails sometimes seem handier than the screws when installing the drywall.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Carlsbad Home Improvement

Unique Shower Curtains

It is said that beauty is standing out of the crowd. Being different is key in this. Unique shower curtains are sure to transform your bathroom. They will allow you to make a fashion statement for yourself. You can be able to express your personality using these curtains. However, you must make the right choice if all is to work out well.

Unique shower curtains are available in different designs, colors and fabrics. Some of the designs include: the solar system, the weather patterns, timetables of when to brush teeth among others. These curtains can be very educative to children. There are also contemporary designs from which you can choose from. The bathroom is a place you visit daily. You should therefore make the visit worthwhile.

If you love art, you can paint the curtains yourself. You may use the spray paint method or the latex paint method. This may be done on the fabric of your choice. You may draw water lilies, the sea, ships and other items related to bathing. Alternatively, you can draw sunflowers and creepers. These will brighten your bathroom. They bring a sense of energy.

Unique shower curtains will certainly give you a feeling of satisfaction. They will allow you to be as creative as you want to be. If you do not have the time to paint, you can look in the Internet. It will allow you to view different designs and make an appropriate order. The companies usually make designs that are not ordinary. The best thing is that you have the upper hand on how the design will be.

Peter Gitundu Researches and Reports on Shower Curtain. For More Information on Unique Shower Curtains, Visit His Site at UNIQUE SHOWER CURTAINS

You Can Also Add Your Views About Unique Shower Curtains At My Blog here UNIQUE SHOWER CURTAINS

How Many Bathrooms Do You Really Need? Building New Homes

When my dad was a kid, they lived in a two bedroom house with one bathroom and the family consisted of him, his two brothers and his mother and father. When I grew up, we have it a little bit better. We had the same sized family as my father did, but we lived in a three-bedroom house with two bathrooms.

How many bathrooms do you really need? Think about it. Here's what I would like to suggest, if you have more money than you know what to do with and would love to help the economy, then you should put as many bathrooms as you need in your home.

If you really need to tell your friends, that you have a 250 bedroom house with 275 bathrooms, and you have the money to pay for it, do it and knock yourself out. However, if you are building a new home, I would like you to consider, this question. How many bathrooms do you really need?

If you want each one of your children to have their own bathroom, then go for it. It will require more cleaning, more money to build these bathrooms and is it really necessary.

Here's what I would suggest as a guideline for deciding, how many bathrooms you really need. One bathroom for two or less people, two bathrooms for five or less people and three bathrooms for eight or less people. You could actually add one bathroom for every three people as a general rule of thumb.

Don't get carried away and start installing bathrooms all over your house, it doesn't make sense. Bathrooms are expensive and I have been in the homes, where I was the only person that used at bathroom. Some bathrooms might not ever be used.

Click here if you are looking for some more Bathroom Remodeling Ideas

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Click Here If your looking for some great Bathroom Ideas or Bathroom Remodeling Contractors

Pictures of Bathroom Designs - What a Great Way To Get Inspired!

Pictures of other people's bathroom designs are a very good way to become inspired as to what you want in your own bathroom remodeling project. I know I was inspired to wanting a really high-tech shower/mini-steam room enclosure for my next "full-blown" bathroom remodeling project after seeing pictures of a friend's new bathroom designs.

He found a very nice unit for sale on eBay. See details of the shower unit and even bid on one yourself if you're interested on my website.

Pictures of bathroom designs are really worth the proverbial thousand words! You'll see fixtures that will excite you just as I did with my friend's shower enclosure. You will see color schemes that click with you in pictures of different bathroom designs. You will be amazed as to just how much inspiration can be obtained from pictures of bathroom designs that you come across either online or from magazines or through other means.

I have posted a number of pictures of bathroom designs on my website for you to view. These are different bathrooms that I've either had a hand in building or that I've found here & there. I really love good design in architecture and because of my eye for what works and what doesn't, I've put together quite a portfolio of different pictures of bathroom designs. Check them out for yourself at my website.

You can also do a search on Google images
for "bathroom pictures" or "pictures of bathroom designs".

The thing you need to do at this point is to start organizing your pictures of bathroom designs into a system where you will have all of the details about where you found the picture and what interested you about it.

Then you can file it in a manner that will allow you to find it again at a moment's notice. This way your initial research about pictures of bathroom designs will be as fruitful and efficient as possible.

This truly can be a very fun and inspirational time period - using pictures of bathroom designs.

=================================================

John Mann, "The Electric Mann", has been involved in the residential construction industry for over 25 years. He's worked as an Electrical Contractor and a General Contractor in Residential Remodeling and is an expert on Kitchen and Bathroom Design and Remodeling.

Signup for his "Bathroom Remodeler's Newsletter" and get a FR*EE 7-Part mini-course (Value $67.00 US) called
"How To Avoid the 7 Biggest Mistakes People Make When Remodeling a Bathroom!" by visiting http://www.TheRemodeledBathroom.com

Click Here to Learn More About Using Pictures of Bathroom Designs as Inspiration for Your Own Bathroom!

=================================================

How Wide Should I Make My Carport? Planning Your Next Project

Whether you live in a home with or without a garage, you might be thinking about building a new carport. You've came to the right place and by the time you're done reading this article, you should have acquired a little more valuable information for your next home remodeling project.

Some homeowners install carports in front of their garage, on the side of their homes or even in their driveway. Car ports can be built anywhere on your property, as long as you have enough room and access to these areas for a car to be parked safely.

The most important thing to remember, when building a carports, is the width that will be required to park your vehicle underneath it. You will need to allow plenty of room, so that you will be able to access your vehicle comfortably.

There are plenty of carports, all over the country that are built right next to something, like a retaining wall, the side of your home or even another garage. I myself have parked in carports that were too small and over a period of time became an annoying inconvenience.

The minimum width that I would build any carport would be 10 foot wide, if you're going to build your carport next to a building, I would suggest that you park your car, open your door and measure the width of your car, with your door open.

This will give you a comfortable width for building your new carport. This is the best advice I could give anyone, who is planning on building a carport.

Garage Building Tips

If you're thinking about building a garage and San Diego County, we would be glad to help, for more information click on this link San Diego Garage Building

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading my articles.

Home Bathroom Design

First thing before you start a new home bathroom design is to picture how you want it to look like. Picture yourself in a nice calming environment, what do you see? So you see the ocean? Perhaps a nice field of green grass? Whatever it may be, think about it as it is sure to make your home bathroom more personalized. Remodeling your bathroom's design shouldn't be a stressful process at all as long as you already have a concrete idea of how you want it to come out in the end.

A great tip is to cut out pictures from a magazine or download some from the internet. These pictures would serve as an inspiration and help you clearly see your vision. This would not only help you see what will work and what wont, the pictures would also help show the people you'll hire exactly how you want the home bathroom design to look like. Look at home design magazines and websites and make use of some of computer software's that are now available to aid you with the design. These programs help make it easier for you to come up with design and layout schemes without the hassle of drawing it up.

Next is to come up with a nice color scheme. Bathrooms tend to be painted in very light and breezy colors such as whites or pale yellows. This is mainly due to the fact that a lot of people look to their bathrooms as a place to relax after a long day. But don't be afraid to mix and match colors. A great tip to bring life into a monotone home bathroom design is to add some flowers. Orchids always look best. You can also add color through the bathroom fixings as well as in the towels. By having a neutral toned bathroom would allow for more experimentation with the fixings as well as in the accessories.

You should also consider the space and how big your bathroom is. Balance is a key and you would want a free flowing space in your home bathroom design to prevent it from becoming too small and cluttered. Maximize your space, if you have a small one, by bringing in all the necessary items first and be creative with storage. Imagine putting a wicker chair in your bathroom when hardly anything else fits in. Prioritize function before aesthetic appeal. To create the illusion of space in a small bathroom, try installing some mirrored tiles.

It is also wise to make sure that the items and accessories you're bringing into the home bathroom design are all bathroom-friendly. Meaning, they are suited for an environment that is constantly moist. Don't bring in fabric covered seating unless you want to sit on damp sofas. The addition of plants would also help bring a sense of calm to your home bathroom design. A couple on each corner would do, if you have a small bathroom, a small one right by your sink or on the toilet would be a great addition. Remember, the design is all up to you. Just be creative and utilize the space well.

Aikaz Run - Bathroom Design Advisor

For more information on how to design your bathroom to be amazing look, visit our Bathroom Design resources at http://www.bathroom-share.com

Plumbing Problems and Solutions - Repair Manuals

If you've owned a home for over 20 years, there's a very good chance, that you've had a water pipe break, a drainpipe clogged, a toilet that wouldn't flush right, or a water leak that damaged part of the home. If you don't know, what you're looking for and you have no idea what damage can be done, over time, this could mean trouble for the homeowner.

Plumbing problems like these have been around and will be around for many years. Knowing what to do about them, how to repair them and what materials will be needed, can be found in plumbing repair manuals for books. How would you like to have a professional plumber to advise you on your plumbing repairs. What if I told you that you could have a plumbing professional on hand at all times. Is this something that you might be interested in.

Well I can't guarantee that, so let's forget about what I just said and go to the next best thing. Plumbing repair manuals are full of tips and advice that when needed can sometimes be priceless. If water is leaking from the ceiling in your home and you have no idea, where the water is coming from or how to stop it from leaking, any information could be priceless and I mean priceless.

Plumbers, usually charge over $100 an hour for emergency service. I've seen plumbers come to peoples homes, turn the water off to the house, stop the water from leaking and now it is no longer an emergency. The plumber quickly pulls out an invoice for the plumbing repairs and it could be over $1000, if you decide that this is ridiculous and choose not to pay it, the plumber can hand you a bill for stopping the water leak. Some of these bills are what I would consider quite ridiculous, for just shutting the water off.

You're not paying the plumber for the amount of time it took him, you're paying him for his knowledge. If you knew where to shut the water off, you wouldn't have an emergency situation and could contact a plumber during normal hours. This could save you hundreds if not thousands of dollars.

With a simple home repair manual or a home plumbing book, you could prepare yourself for a situation like this and other plumbing problems. Most home repair manuals have general solutions and advice and can solve most of the problems around your home. If they can't solve all of the problems, they can probably save you from major catastrophes like a water leak.

Most of the time it's not the water leak that will cost the most money, it's the damage the water will do to your furniture, carpeting, wood flooring, walls or ceilings. A little information and preparation can save you a lot of money in the long run.

Home Plumbing Books

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

Fire Damaged Indoor Air Quality

During a fire damage heat, smoke, and the depletion of oxygen interact, exerting themselves as serious hazards. Smoke alone consist of particles (such as soot), gases (such as carbon monoxide), Volatile Organic Compounds (VOCs) of a variety of complexities, aerosols, and free radicals that can have an effect on the building and occupants' health long after the fire is extinguished.

Something else to consider is water and its contributing affect on poor indoor environmental quality during fire damage. Water is a product of combustion. During a fire water droplets can serve as a vehicle of transport for absorbed acids, such as hydrochloric acid, making it a contributor toward smoke-inhalation injuries. Additionally, residual moisture, left behind during the fire-extinguishing processes, can contribute toward the development of microbes, such as mold and bacteria, when not processed quickly and adequately enough.

So, as you can see the pollutants found in fire and smoke damage can be numerous, and can come in any chemical state (solid, liquid, gas, or vapor), including but not necessarily limited to:
• "Particulate Matter (PM)"
• gases
• humidity
• "Bioaerosols"

"Particulate Matter (PM)" is a term used for a mixture of solid particles and liquid droplets found in the air. Some of these PM are large or dark enough to be seen, like the soot and smoke concentrations you see settled onto your furniture and building components, while other PM are so small they can be detected only with an electron microscope. PM can be organic (carbon based matter like baseboards and door and window components) or inorganic (such as fiberglass and asbestos).

Some of the gases associated with fire and smoke damage are carbon dioxide, carbon monoxide, nitrogen oxides, sulfuric oxides, and Polycyclic Aromatic Hydrocarbons (PAHs). Many of these gases can be colorless and odorless; thereby, unnoticed during the fire and smoke damage, its cleaning, or reoccupation.

"Bioaerosols" is a term used to describe airborne PM that are living or originate from living organisms including microbes, fragments, toxins, and particulate waste products. Bioaerosols are very small and range from one micrometer (0.00004") to one hundred micrometers (0.004"). Bioaerosols are easily manipulated, transported by air currents, insects and moisture.

Health consequences vary with the size, mass, concentration and other contaminants which interact with one another. The Environmental Protection Agency (EPA) has found that respirable particles at concentrations of 250 to 350 micrograms per meter increase respiratory symptoms in compromised individuals. What this means for you is that when faced with a fire damage it is important to make sure qualified people are contacted to identify and remedy any potential pollution hazards in your home or office.

"Where can you find a qualified fire-damage restoration technician to clean and repair your home?" I'm only familiar with one organization that trains, evaluates, and certifies cleaning and restoration technicians in this area. While there may be more, the Institute of Inspection, Cleaning, and Restoration Certification is the one I am familiar with. For inspection most especially concerning the indoor air quality look for a Council-certified Indoor Environmental Consultant or Council-certified Indoor Environmentalist either at the Indoor Air Quality Association's website or the American Indoor Air Quality Council's website.

As with any damaged environment understanding the condition of that environment is key to providing for the health and safety of occupants as well as restoring the structure to its safe and sound structural integrity and normal ecology. Sometimes the damage goes beyond what you can see. Sometimes cleaning isn't enough. In those cases or in cases where you and/or your doctor suspect a pollutant that may be triggering symptoms in you or another occupant, contacting a Council-certified Indoor Environmental Consultant (CIEC) can help you and your doctor make decisions on treatment based on our inspection, testing, and analytical report. Most can also help write a scope of work that will reduce and/or eliminate the pollutant(s). The Indoor Air Quality Association and the American Indoor Air Quality Council have a list of Council-certified Professionals on their websites for your reference.

For additional resource material on understanding hazards associated with fire and smoke damage we would like to recommend this book, "Fire and Smoke: Understanding the Hazards". There you will find more specific information on some of the pollutants discussed on this page.

The American Red Cross has a good resource as well: "PICKING UP THE PIECES AFTER A FIRE".

The founder of SOLUTIONS Indoor Environmental Consulting, Jason Yost, has been in the cleaning, restoration, remediation, and indoor air quality industries for over sixteen years, doing everything from carpet cleaning, installation and repairs; water and fire damage inspection, consultation, and restoration; microbial inspection, consultation, and remediation; crime scene remediation and restoration; as well as been an educator to private and public groups through various business network groups, classrooms, seminars, and news programs.

Jason currently holds four of the most prestigious board-awards in the industry, awarded by the American Indoor Air Quality Council:

Council-certified Indoor Environmental Consultant

Council-certified Indoor Environmentalist

Council-certified Microbial Remediation Supervisor

Council-certified Microbial Remediator

Additionally, Jason holds a certification as a Water-damage Restoration Technician from the Institute of Inspection, Cleaning and Restoration Certification (IICRC).

Jason volunteers his time as a member of the American Indoor Air Quality Council's certification board, and is an Individual Member of the Indoor Air Quality Association. For more information you can review Jason's IAQA PRO.FILE at http://www.iaqa.org/profile.asp?id=223 or visit his website at http://www.SolutionsIEC.com

Prefabricated Shower Stalls

Installing a prefabricated shower stall often turns out to be a tricky and time-consuming job that takes great practical skill, yet with sensible pre-planning and the right tools for the job, a professional result can be obtained by the average home-handyman. Allow 3-4 days to complete the work and brush up on your carpentry, plumbing, wall-preparation and finishing skills because you're going to need them all!

To begin with, make sure you have the right equipment and tools before you begin the job. Importantly, purchase the shower stall before building the frame it will fit in in order to get accurate dimensions.

You will need: a prefabricated shower, electric drill, plumb level, tape measure, caulk, screws, hole saw, shower/tub adhesive, tape, pencil, leather work gloves, hammer, work boots and an adjustable wrench. Protective eye-wear is also highly advisable (wear when using power tools.)

Getting the prefab shower into position can be the tricky part. You will need to fit it through an existing doorway or an outside window. In some instances, part of an exterior wall may have to be removed in order to get the unit inside; seek professional advice first if required.

Because prefabricated shower stalls have watertight walls, cement-based backer boards are not needed.

It is advisable to install insulation between the studs in order to reduce plumbing noise.

When drilling holes in the unit's walls to fit the faucet and shower arm, measure carefully in advance and always wear protective eye-wear when drilling.

Position parts carefully and attach the unit to the framing. The drain piece, shower handle, escutcheon, and shower-head all need to be fitted correctly to prevent leakages and future problems. All seams need to be caulked efficiently and a thorough checking of any leaks needs careful attention; later corrections to any plumbing faults can be difficult to carry out.

Finally, finish the walls and fit a shower door or curtain bar. It is vital that you seal the joints between the bathroom walls and floor and shower enclosure with a good quality silicone! Installing water-resistant drywall around the top edge of the shower stall can be a wise, long-term investment; tiling the top edge is also a great idea as it will likely last a lot longer than wallpaper or paintwork.

If you aren't adept in skills like demolition, plumbing and drywalling, you may be best served by employing a qualified professional to carry out these tasks.

As a final reminder, installing prefabricated shower stalls can be quite fiddly and time-consuming. The plumbing especially has to be completed with some expertise in order to have a sound unit. Yet having said all this, a successful shower installation is achievable if you take your time, check well for any leaks and consult an expert for advice if the need arises.

Good luck!

For articles by the same author, on a variety of subjects, please visit: http://fatherspirit-mydailybread.blogspot.com [~ MY DAILY BREAD ~ ; Telling, not selling!]

Home Purchasing Checklists Provide Protection

Home purchasing checklists provide protection for consumers with useful information for future home repairs or current home repairs that will need to be done before the home is sold. Home inspectors often use checklists like these, while they're inspecting the home.

If more home shoppers used home inspection checklist while shopping for houses, we would probably have more satisfied homebuyers than dissatisfied ones. Recently just purchasing a home, we had our real estate professional, the previous homeowner's real estate professional and a mortgage lender, involved in the purchase of the property.

There was a home inspection report from the current homeowners, available for us to look at. It provided us with the damaged parts of the home that were repaired or replaced. Some of these repairs were from termite damage and it was stated so on the report. This was helpful information for us as we walked around the home inspecting it for damage.

The work that was repaired to look satisfactory and the rest of the home had minor damage. Listening to one of the real estate sales people that were involved in the transaction, you would've thought we would get in the deal of a lifetime and they had nothing but good news to say about the product they were representing. I easily understood that, this person could have influenced some one into believing that the home was in great shape, if they didn't have a home inspection checklist with them.

The home had been re-carpeted, painted and was in generally good shape. The problems with the home, were the old windows that were hard to open, the heating unit leaked gas, the tile flooring that ran through the kitchen and a large room addition looked great, except for one thing, they installed the tile over linoleum.

This eventually will have to be replaced as the tile starts to separate from the linoleum. While I'm writing this article, there's about 40 square feet of tile that needs to be replaced, because it's popping up and cracking.

A home purchasing checklist does not guarantee that you will find everything but can't eliminate some of the things that homeowners have the biggest problems with. If you could just eliminate one of these problems, the small price of purchasing, one of these checklists would be worth it.

Home purchasing checklists provide protection for the shopper and I would recommend, never shopping for a home without one.

If your looking for some more home inspection or home building ideas.

By Greg Vandenberge

What is a Three Way Home Electrical Light Switch?

A three way home electrical light switch is a special light switch that can be used in your hallways, large rooms and stairways. These light switches are specially made to operate one light or a group of lights from two different locations.

They are most commonly found in hallways and provide a homeowner with the option of turning the light on at one end of the hallway and turning it off, when they are finished walking through the hallway and are about to enter into another room.

Before three way home electrical light switches were made, people would turn the hallway light on and leave it on or they wouldn't turn the hall light on at all, because they knew that after they walked down the dark hallway, they wouldn't be able to turn the light off at the other end.

Three-way light switches are also used in stairways. It makes a lot of sense, to be able to turn your stairway light on, at the bottom of the stairs and then after you have walked up the stairway safely, you can simply turn the stair lights system off.

As homes become larger, it's not going to be uncommon to find three way light switches being used at either end of large rooms. If your living room or family room was located within the center of your home and had an entrance at each end, it wouldn't be a bad idea to install a light switch at each end, for travelers who are simply walking through these room.

Remember that three-way light switches, are used to operate lights from two different locations.

If you're really interested in basement remodeling and repairs, you should click on this link Great Home Repair Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Encinitas Home Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Building Codes - Stairway Construction

The stair building code was created for building safety. Before the building code and local city enforcement (Building Inspectors), anyone could build a house. This meant Uncle Earl who had just watched a couple of his friends build a house down the street construct some sort of a dwelling. The next step for Earl would be to help these guys for a day and now he is a professional home builder. You get the point.

Stair Building Codes create the safety needed for one of the most hazardous areas of your home. You might know someone who has fallen down a stairway?

I lived in a house I built for 15 years and I redesigned the stairs from a winder design to a T shaped set of stairs. Both sets of stairs were built using the local stair building code for my city.

Wow I could not believe how many times my family members fell down the stairs. I even fell down once. I was amazed. When I switched from the winder to the T shaped stairway there were less accidents. My point is that even using the stair building codes this is a dangerous part of your house.

Having a professional stair builder install your stairs is great advice. Take it. For example this happened to me on quite a few jobs. I get a set of plans from a architect who has been designing houses for over 40 years. I looked at the stairway to find out that he has designed a stairway that is too small for the length of this part of the home. If I build the stairs using the plans that by the way were approved from the local building department, I could have a problem.

You are probably asking yourself how does this happen. Aren't these people experienced professionals. Of course they are. They probably have the U.B.C. (Uniform Building Code) in their office somewhere. Everyone makes mistakes here and there but this is one area of the home where safety is a big concern.

Just look at it like this. The stair building code was designed to improve the safety and reduce the number of accidents while using the stairs. Over the years I have seen stairs poorly designed and constructed. These stairs create problems for the owners of the buildings not just the people that use them. Did I mention lawsuits. This is one area where a lawyer will have a field day.

As a building professional I advise you to use the stair building code first for safety and second to avoid lawsuits. Get an idea from some of the pictures I have taken over the years on problems with stair building.

Use common sense while building or remodeling your home. It goes a long way.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stair Building Articles

Retaining Walls Suffer From Moisture Problems

Whether you're driving down the road or through a neighborhood and you notice a retaining wall that has large cracks in it, or is severely discolored, or one that has white calcium deposits from moisture covering the entire wall, you've got problems with moisture.

The retaining wall is designed to hold the dirt back, that's it's sole purpose. It's not going to hold any moisture back unless someone has installed a waterproofing membrane to separate the soil from the concrete block wall. If the soil isn't ever going to get wet, then you probably don't need to waterproof the retaining wall.

However that's normally not going to be the case. So we need to waterproof the interior of our retaining walls to eliminate future moisture problems that could eventually, deteriorate as moisture starts to accumulate, inside of our block wall for a longer periods of time.

If you don't know anything about waterproofing, I would suggest that you hire a waterproofing expert. Waterproofing looks easier than it actually is, and might be out of your scope of work.

I'm not going to suggest that you use waterproofing paints, because I haven't seen great results with these products. However, if you're not that concerned about your retaining wall and are looking for a cheaper way to apply any waterproofing materials, these paints might not be a bad idea. Sometimes, Something is better than nothing.

If you live in a relatively dry climate, it might not be necessary to waterproof your retaining walls. But if you live in a damp or moist area, especially an area where the ground is moist all year round or more than six months out of the year, I would suggest that you waterproof the back of your retaining walls.

If you're really interested in basement remodeling and repairs, you should click on this link House Basement Repair Ideas. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Dryer Vent In Basement Window.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Don't Let This Happen to You - Home Computer Electrical Damage

If you've read any of my other articles, you know that I am always coming up with great ideas, tips and even a couple of stories that can save homeowners lots of money. Here's another one of those stories, that involves a friend of mine who asked me if I could fix his outdoor electrical outlet.

I was over at his house one day, and told him that I could probably fix the electrical outlet and if we needed any parts, we could run down to the lumber yard and pick them up and his problem would be solved within a few hours. This two hour repair was about to cost him the hard drive on his computer, but neither one of us had any idea what was about to happen.

We each agreed to give it a shot, I told him to go over to the electrical panel and turn off the breaker that went to his outdoor shed. He proceeded to turn off the breaker and yelled out," It's off, try it." I plugged in an electric drill and it was still working, as he was walking around the corner, towards me, I showed him that the drill was still on and he hadn't turned off the right electrical breaker.

He went back and turned off a couple of more electrical breakers and the drill was still running. Now he frantically started to turn off one electrical breaker at a time, until I yelled out," It's off, the electrical power is, off you can stop."

I repaired the electrical outlet and he went back to turn every electrical breaker back on that he had turned off. We were proud of ourselves and he now had electrical power, back to his shed and he was happy.

Now for the bad news, his computer was running and when he turned the electricity off and on, it must've done something to his computer hard drive and it now needed to be replaced.

The moral to the story, isn't that you shouldn't help your friends. It's that you should, make sure that your computers are safely off, before you attempt to do any electrical work to your home.

It wouldn't be a bad idea, to have a battery backup, for your computer, if you use it often, just in case there is an electrical failure or something happens like the story above.

If your really interested in saving money on your home electrical bills - Energy Saving Books

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

10 Things a Homeowner Won't Tell a Contractor - Common Courtesy

I've been a contractor in the state of California for over 20 years and there are some things that a homeowner won't tell a contractor. These are a few things that a contractor might want to hear, but a reluctant homeowner, might have second thoughts telling their contractors how they really feel.

1. We are happy with all of the work that you did in a timely manner and we appreciate your services.

2. We are happy with the way you performed your construction tasks, efficiently and we appreciate your services.

3. The work was done by a true professional and we would recommend you to any one of our friends.

4. The payment plan that you created in the contract worked out perfectly and never made us feel uncomfortable. It never seemed like you had too much of our money or we were putting you in a bad spot financially.

5. Thanks for keeping the job clean, it meant a lot to us, because we have seen other construction jobs that look like a tornado ran through them.

6. Thanks for helping us with our design. Working with your contractor on a daily, weekly or monthly basis can be frustrating or joyful. Let the contractor know either way how you are really feeling.

7. You and your crew are extremely hard-working and we appreciate the simple fact that you didn't come to work late or leave early.

8. Thanks for the reasonable priced estimate on our project. You helped us say a lot of money and we appreciate that sincerely.

9. Thanks for doing the extra work at a reasonable price. You could have gouged us at certain times, but you chose to be fair and work things out, in a way that would benefit both of us.

10. This one is the most important and often overlooked by homeowners and it's simple and easy to do. Thanks for doing what you said you were going to do and actually doing it.

Just a simple thank you and paying them on time, for a service well done is enough for most contractors. However, a little common courtesy can go a long way, even in the construction industry.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Home Remodeling Contractor

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Click here if you're looking for additional Homeowner Contractor Advice. If you're interested in gathering more information on how to hire a good contractor, make sure that you visit our website.

Take Pictures of Your Growing Foundation Damage Or Cracks

I champion people and try to get them to look at their house, at least once a year. One of the easiest ways to inspect your home is to use a home inspection checklist and if you really want a good home inspection checklist, there's a good chance that you are going to need to purchase one. You get what you pay for and don't ever forget that.

Foundation repairs usually start with a small crack and that's no joke. If you notice a crack, take a picture of it and save it somewhere. If you think, that the crack is actually getting a little bigger or starting to separate, you can simply take another picture and compare the two photos.

I would like to give you an example of what I'm talking about. Sometimes we look at something and we think that it's getting larger, but we don't have anything to compare it to. As time goes on, we think that the crack is still getting larger, but our mind is creating an optical illusion. This happens to a lot of people.

If you had a picture, from a few years ago, you could refresh your memory and this could be very helpful in reducing your anxiety or jumping to conclusions about foundation damage. Trust me, sometimes, I'm like a medical emergency crew, going to visit a homeowner to relieve their foundations stress. People panic over foundation cracks and I'm the doctor they call for any one of their home emergencies.

I would also advise you to take pictures of the rest of your home. How hard would it be to take about 300 pictures of your home each year and store them on your computer or on a disk, for easy access later? A picture is worth a thousand words and don't ever forget that.

Click Here for Some More Great Foundation Repair Solutions.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Problems. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Why Bathroom Remodeling Will Add Life to Your Home

There are many ways to remodel a bathroom and depending on how extensive of a remodel project you want, you could spend three or four times the normal amount if you are doing a lot of tile work, granite counters, new cabinetry, etc. Usually the older the bathroom the more extensive and expensive the remodel project will be.

There are so many things to consider when renovating your bathroom. Replacing the current window with a larger one will add light and also give you an opportunity to add a more energy efficient window. Maybe you can add a skylight, this is an excellent way to bring in more light and increase the feeling of spaciousness. Replacing fixtures with modern designs can make a bathroom more decorative and style that not only looks good, but is functional. There is a wide price range for light fixtures, so you can easily pick one that fits your budget. Replacing a toilet can be a simple thing if you avoid the most common mistakes made by many homeowners.

Remember, the door fixtures will be the first thing you see when you enter any room so you might want to start here! Remember, if you don't fell 100% comfortable with or confident in the possible outcome, stop and meet with your contractor immediately and discuss an alternative route. Piece of mind is priceless especially with a project of this importance. After all, it is your sanctuary.

A shower remodel is also a perfect time to experiment with shower heads. There are many types, styles and brands you can choose from. The type of concrete used for shower walls and floors is highly engineered and a must if your looking for the perfect job. Tiles are generally durable, and you won't have to worry about replacing them if you choose the right material.

Tile is also an area where you have a wide range of choices. From sheet linoleum to ceramic tile the choices are numerous. Tile mosaics are especially popular in Mediterranean style bathrooms. Tile can also be used as decorative design pieces (glazed, glass mosaic or quarry styles).

Bathroom flooring, more than anything else, can have a stunning effect on the overall look of a bathroom; choose bathroom flooring wisely and you will achieve the bathroom of your dreams? Many homeowners like to install below floor heating, which is recommended with a stone or concrete floor.

You can install hardwood floors on the floor of your Bathroom, provided that they are coated with a water-proof finish. Many people will opt for this type of flooring in this part of the house because it provides warmth and has the effect of creating a soft relaxing atmosphere.

Neutral colors are probably your best bet and will last for many years to come. Some contractors will recommend using self leveling cement but good old poured concrete screened floors is the only way to get that perfect job. Selecting a contractor by referrals is also the best way to choose the right company for the job.

DiCicco Building Company has been doing Home Additions Macomb for over 20 years. We are also leaders in Macomb Remodeling along with being an award winning custom residential home builder. We also specialize in Finished Basements and home additions.

Simple Light Switch Replacement

Do it Yourself Garage Remodels

With the current credit crunch, households around the world are coming up with an unexpected source of additional income: they simply convert their garage into an apartment and lease it out. Garages are no longer repositories for the family car.

Thinking of it, that's not a bad idea, is it. Even if the idea of leasing out your garage does not sound very good to you, there are still ways of taking advantage of the garage extra space and put it to some productive use.

An apartment garage plan is pretty easy to design, and with a bit of know-how, to build.

What is it for?

Obviously the first question to be asked is what will the garage future use be. Traditionally, garages have doubled as storage space for anything from gardening tools to old books. It is also being used as workshop, office or even as an additional room for the boys. With a bit of imagination, there is no limit to the good uses one can put his garage to.

Once you have made up your mind about the intended use, you are in a better position to design the garage layout.

Here are a few design tips:

• If you plan to use the place as storage space, a good idea is to place wall shelves to accommodate gardening tools like the lawnmower, brooms, hoses, shoes etc. Try also to group these in categories, based on their respective frequency of use: normally the most used items should be of easy reach.
• Place hooks. These will allow you to gain as much space as possible on the the wall and even on the ceiling.
• Remember accessibility. If the intended garage apartment is located next to your house, try to create a direct communicating door between them.
• Create autonomous units. If you intend leasing out the space, integrate a small kitchen, a bathroom and a maybe couple of additional rooms.

Can you do it yourself?

If the idea sounds interesting, you may choose to hire the service of a prefab contractor to build an apartment garage for you. While their technical expertise is valuable, designing your own garage plan is easy, provided you apply some basic design factors.

In general an apartment garage plan should provide for one or two doors, and depending on the number of rooms, a few windows too.

How about the budget ?

The cost of building home additions depends largely on the region where you live.
Once you know exactly what suits you best, you are in better position to work out the financial side of the project.

The building materials

The building materials to use will also influence the overall cost as well as the durability of the construction. I have found that prefabricated kits that come with an instruction manual often cost less.

Finally, remember too to take into account aesthetic considerations. A good apartment garage plan should not only look nice on paper, but it should also be practical and usable once build.

Additional Apartment Garage tips can be found at Homes By Olga.

Bathroom Remodeling Problems

Fixings Squeaky Stairs - Home Repairs

Oh yes the common problem of squeaking stairs in an older house. This could become very frustrating and annoying as you walk up and down the stairs. There seems to be one or two stair treads that are always squeaking. That annoying sound as you walk as softly as you can on your way down to the kitchen in the middle of the night to grab a quick snack.

The number one cause of squeaking stairs is when the nails used to fasten the stair tread to the stair strainers has worked its way loose. Over time as the lumber shrinks in the stair treads and the stairs stringers. You will start to develop a separation or a gap between the stair tread and the stair strainer.

The stair stringer can shrink as much as 3/8 of an inch in just a few years. I was building a home and went to measure the stair stringer that was 11 1/2 inches wide originally. Then I measured it after two months outside in the summer sun it now measured 11 1/16". I was amazed that the lumber could shrink that much in such a short period of time.

As the stair stringer shrinks it starts to pull away from the plywood or hardwood stair tread. As it starts to separate from the stair tread the nail will stay in its original position until the stair tread starts to put pressure on the nail eventually lifting it up a little bit higher than its original position.

As you step on the stair tread the squeaking sound you hear is the nail rubbing against the stair tread. There are a few ways to fix a squeaking stair tread. If you have access to under the stairway you can apply some adhesive along with a 10 inch 2 x 4 under the stair tread and attach it to the stair stringer.

First apply adhesive to two sides of the 2 x 4. The adhesive will be used to glue the stair tread to the stair stringer. You can use screws to screw the new 2 x 4 onto the side of the stair stringer.

If you cannot access the underside of the stairs and you have carpeting you can actually locate the stair stringer and drive a 2 inch screw through the carpeting in to the stair stringer. This will pull the stair tread down and will not allow it to rub up against the nail making that awful sound of a squeaking stair case.

If you have a finished wood stair tread you will not be able to screw through it into the stair stringer without damaging the finish on tread itself. It will be easier to access the stair stringer from below somehow and apply the 2 x 4 with the adhesive to stop the stair squeak.

You can apply these methods to as many stair treads that are squeaking without taking apart the entire staircase and rebuilding it.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Stair Building

Pocket Door Problems

Provide Protection For Your Entrance With a Porch Enclosure

A porch enclosure is usually an enclosure built around the main entrance of the home to protect it from the elements of weather. It usually has one or two entrances and a square or curved top. Quite often such an enclosure is built between two offsets on the front of the house, but it can also be a bay extending out from the house. The size of the enclosed porch depends on how you plan to use it. You will need to have a larger porch if you want to place chairs there so you can enjoy the outdoor scenery without having to go outdoors.

Generally an enclosed porch is a fabricated unit made of glass panels. The doors are specially made to fit in the aluminum rails. There are many different designs in shapes and sizes of these on the market and you can have one custom designed to meet your needs.

Some of the benefits of using such an enclosure for a porch include:

* keeping snow and ice away from the direct entrance to your home, which will in turn keep moisture from seeping in
* preventing water from leaking in through the door in times of heavy rain
* added security for the home
* serving as a buffer that prevents heat from escaping during the winter
* offering ventilation during the summer

When you have an enclosure around the entrance, you can have a wooden door instead of having to opt for a steel door. If you do have a steel door, the protection of such a porch will ease your concerns about the warranty on the door. The addition of a porch will add a touch of class to the home and increase its resale value.

It is not hard to install such an enclosure after you have the exterior of the home complete. The glass panels are designed so that they fasten together to form a wall and the doors are mounted to this base. Some of the enclosures also have the ability to adjust to uneven walls and floors so that nothing will look out of place.

For more information on porch railings, screened porches and related topics, visit AboutPorches.com

Architects And Home Design

5 Reasons Not to Have a New Roof Installed Over an Old Roof

So you need a new roof and are trying to decide whether or not to try and save some money by having the new roof installed over an existing layer of roofing. This technique is quite common in many areas and many roofing contractors don't see any problem with this method and have no problem trying to sell homeowners on a lay-over or go-over as this technique is called. They are wrong.

5 Top Reasons A Lay-Over Or Go-Over Is A Bad Idea When Re-Roofing

1.) Areas that have or had leaks can't always be addressed properly

There is a good chance that your old roof had some problem areas including possible leak spots, whether you noticed them or not. Without tearing off the old roof and properly identifying these types of trouble spots and determining where the leak was coming from and traveling to it is impossible to tell what areas of your roof may need some special attention.

2.) Any rotted wood under the existing roofing will only get worse

There could be areas that have rotted wood hiding under the old roofing. These rotted areas need to be identified and replaced before a new roof is installed. Obviously if your roofing contractor is only doing a lay-over roofing installation then these rotted areas will remain covered up and only get worse as the years go on. Also the nails holding down the shingles in areas with rotted wood cannot properly do their job and you have a much higher risk of shingles blowing off in those areas.

3.) Eaves, rakes and valleys need special treatment

This is a big one. The eaves, rakes and valleys of your house need special attention when your home's roof is being installed. This is especially important in colder climates like Massachusetts, where we are located. In the winter time the eaves of your house are under attack by Mother Nature, whether it is through ice dams, snow build up, or just the constant freezing and thawing that occurs throughout the winter season. When a new roof is properly installed the roofing contractor needs to put new aluminum drip-edge around the entire perimeter of your roof.

Next they need to apply a 3 foot wide section of ice & water barrier around the perimeter as well as in any valleys on your roof. Then they can begin to install the new roofing. Without tearing off the original roofing there is no way to properly install the new drip-edge or ice & water barrier. On a lay-over type of roofing install, the roofing contractor is counting on the existing products on the home's roof to still be up to par and be able to handle the winter conditions. All too often the old products fall short whether it was because they have outlived their lifetime, were sub-par to begin with, or maybe they were never there to begin with (all to often the latter is the case with ice & water barrier).

4.) Extra roofing weight is no good for old rafters

One of the more obvious problems with a lay-over re-roof is the added weight of the extra layer of shingles. On most newer homes this is not an issue, however many older homes have rafters that are considered undersized by today's framing standards. It is not uncommon to see 26 rafter systems on many of these houses. Now in most situations a 26 rafter is undersized to begin with and you certainly don't want to be adding the weight of a new roofing layer on top of an old roofing layer to these already undersized rafter systems. With newer roofs using 210, 212, engineered trusses, etc. the weight isn't always as much of an issue.

5.) Shorter roof life expectancy

Most responsible roofing contractors agree that a lay-over roof will decrease the new roof's lifetime by about 25%. This fact alone means that any money you might have saved by doing a lay-over, as opposed to a tear-off and new roof install, was only a short term savings. In addition, you now have 2 layers of roofing that will need to be removed the next time your roof is done and that will also add more cost to the job

Tear-Off Then Re-Roof Is Always Superior

Well, I just gave you 5 very good reasons to tear off your old roofing and then install your new roof. Yes it can be cheaper in the short term to do a go-over on your old roof, but, in the long term it will cost you more. We never recommend this technique to our customers. We always recommend completely tearing of the old roofing, fixing any underlying problems, then installing a fresh, beautiful new roof that will outlast any lay-over roof as well as better protect our customers' homes.

Josh Johnson is part of the team at BCI Contracting, Inc., a Massachusetts roofing contractor, and he would be happy to provide you with more information about their roofing, siding, and seamless gutter installation services if you visit the website. You can also visit Josh's roofing blog which focuses on the roofing and siding industry, particularly in Massachusetts.

Resolving Home Remodeling Anxiet

Leveling Your Floor - Home Repair Tips

If you've ever been in a building where you feel like you are getting pushed to one side and you can't seem to stand up. You have either been drinking too much alcohol or the floor could be sloping. I was just in a store the other day that was full of antiques and glass but I could hardly stand up because the floor was sloping enough to create what I would consider a liability issue to the store owner.

Sloping floors are not going to be that easy to fix and repair. Repairing these floors will require a little skill and it would be a good idea to hire a professional to repair the damage. This is not going to be a simple fix and this is probably the main reason most people never choose to fix their sloping floors.

Fixing these floors will require either pouring a new concrete slab, replacing the wood floor framing members or replacing the actual building foundation itself. No matter how you look at it the sloping floor is going to be a costly item to repair.

What causes a sloping floor? Termite damage or dry rot destroying the wood framing or it could be as simple as a water leak over a long period of time causing the building foundation to sink and become out of level. Poor soil conditions with either too sandy or an expansive clay soil could be the culprit also.

Sloping floors can be damaged from incorrect landscape drainage. This would involve water settling around the foundation of your home and over a period of time the weight of the house along with soil problems can create the building to start sloping to one side.

The number one contributor to a sloping floor again like most damage done to a house is going to be water. Do your best to keep the water away from the house using roof gutters and landscape drains. These items are relatively inexpensive compared to the costs involved in repairing sloping floors.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Find out more about Water Damage.

Concrete Patio Gofer Damage

How to Weld Metal

The average person's impression of how metal is welded is that you simply fire-up a blow torch and run it along the edge of a metal seam to weld it together. Or they probably think you can just run that same torch across any kind of metal and cut through it, like in the safe-cracker movies. But the reality is that professional welding actually involves some fairly extensive knowledge, and is somewhat of an art form that takes many years of experience to master. Even so, if you are wanting to learn, you can start with a few simple techniques. Once you've mastered the basics and have a beginner's idea, you can then move on to the more complicated skills that take longer to master.

Safety Precautions

Before you ever start any project, always think about safety precautions first. Equipment and supplies can be replaced; you cannot be replaced. You may think that getting burned is the worst thing that can happen in a welding accident. However, damage to your eyes can occur from the intense light that comes from the process. Some metal welding techniques make use of high voltage electricity to create a weld, which always raises the possibility of electrocution or death if the you are careless. As you start any welding project, be sure to wear a proper helmet to protect your eyes, head and hair. And don't forget protective gloves and clothing. Lastly, be sure to read and follow all safety precautions written by the manufacturer of the particular metal welding equipment you are using.

Oxy-Acetylene Welding (also known as Oxyfuel Welding)

This is the type of welding that the average person is most familiar with, and which is often casually described as a "blow torch". However, even though oxy-acetylene welding is the most commonly-known type, it is actually the least used technique among professionals. On the upside, it is less complicated and less expensive than other types of welding. However, oxy-acetylene is less common nowadays because it is less accurate, doesn't produce a weld bead as cleanly as other methods and can result in weaker weld joints due to the slower cooling time it involves compared to other welding techniques. Even so, if you are interested in learning how to weld metal, you may want to practice oxy-acetylene welding in addition to other types of welding. It will be a handy skill to have because it's the best type to use on certain common welding projects, such as pipes or tubes, and when you have to use welding equipment to do repairing, bending and cutting.

Arc Welding

The most common technique used these days is "Arc Welding". If you're learning how to weld metal, you will definitely need to practice arc welding. Rather than using a gas torch, arc welding involves using high voltage electricity passing into the piece of metal. In Arc Welding, a spark (or "arc") jumping across from one piece of metal to the other causes enough heat to melt metal and form a weld. This process is more desirable in most cases because it is more accurate and produces a cleaner, stronger weld. Within the category of "Arc Welding" there are actually several different methods to choose from, depending on the type of metal welding work you need to do.

Shielded Metal Arc Welding (SMAW) may be best when you have large welds or metal welding in unusual positions, where a rough weld is acceptable. With this method, the electricity runs through an electrode rod (or "stick") which actually melts, producing the welded joint. On the other hand, MIG Welding, also know as Metal Inert Gas Welding, or Gas Metal Arc Welding (GMAW), may be better if you are involved in a metal welding project that requires more speed. With this welding technique you don't use rods that you have to keep replacing as they melt. Instead, you use equipment that sends the electricity through a metal tip that doesn't melt, and a separate piece of continuous wire is fed to the tip which melts and forms the weld. TIG (Tungsten Inert Gas) Welding is somewhat similar to MIG welding, but is better when working with thin materials where you need a high-quality weld and speed is not important. As you learn you will also hear of other methods, such as Flux-Cored Arc Welding (FCAW), Submerged Arc Welding (SAW), Plasma Welding, etc. But don't worry too much about remembering all of the various techniques. Just focus on one method at a time and get to the point where you are comfortable that you know how to weld with that method before you learn something new.

Other Welding Methods

Although you will primarily be concerned with Arc Welding and Oxy-Acetylene Welding as you learn how to weld, you might hear about other types and wonder what they are, such as Resistance Welding, Energy Beam Welding and Solid-State Welding. Don't let that overwhelm you right now. Many of those welding methods are primarily useful in large, specialized industrial applications and don't really affect you as you learn how to weld.

Conclusion

Hopefully you now know a little more about the basic concepts that will be important to you as you learn how to weld. As you can see, although there are numerous methods, each with it's own unique set of equipment, procedures and purposes, there are actually only a couple of basic methods you need to remember and practice. To get started learning, start practicing with an inexpensive arc welding setup. Get yourself a machine and just start experimenting with it on some scrap pieces of metal (after reading all instructions and taking all safety precautions, or course). Figure out what works, and what doesn't. You will soon begin to develop a style that is most comfortable for you. Also, get yourself some oxy-acetylene equipment and try that type, too. With a lot of practice, you will become a good novice fairly quickly and will be able to master just about any common project you may encounter.

Want to know more about welding? Visit my blog at http://WeldLikeTheWind.com

Green Homes - Ugly Ducklings Or Beautiful Swans

A "green" home is a home that is highly energy efficient, has excellent indoor environment, and is built to exceed local building codes. So are they ugly then?Look like the Jetson's space-age house? So obvious they would stick out like a sore thumb?No. No. and No.A green home looks just like conventional construction inside and out.

The beginning of a green home is a set of plans that starts with a conventional floor plan and elevations. Then an experienced green home building will modify the systems of the house to accommodate green home features and energy saving devises -A geothermal system rather than air conditioning; in-floor heating rather than a conventional natural gas forced air system; a grey water recapture system; energy efficient windows, doors, appliances, and water heater; and high quality, high 'R'rated insulation.

The best part is that these systems work very different from their conventional counterparts, but are invisible to the homeowner and their guests. The home will be quieter and cleaner without the dust and noise of conventional forced air heating. And the energy cost savings are substantial, depending on your particular situation.

Energy Star appliances sip electricity but are similar or identical to your current appliances. And cabinets and trim can be identical to conventional houses or use recycled material or earth-friendly woods for a more eco-friendly alternatives.

The cladding and shingles on the outside of the home are no different than a conventional home making the home blend in to its neighborhood seamlessly. However, the market value is probably higher than the surrounding homes due to its energy saving advantages and tax incentives.

So a green home is a beautiful swan, not an ugly duckling, at all!

Kim Ward is Marketing Director for Green Earth Energy Homes at http://greenearthenergyhomes.com

Marc Wachter, Kim and Dan Ward, and Dennis Batdorf have teamed up to offer affordable, practical, LEED and Energy Star certified homes. Save thousands on energy costs and qualify for thousands in government tax incentives and benefits.

Based in Yorkville, IL, we currently are building the only LEED certified GOLD home in Illinois. Call Marc at 630-730-8592 for more information about our green homes or to schedule a showing of our model home(s). Email Marc at mwachter@greenearthenergyhomes.com

What You Need to Know to Get Perfect Ceramic Tile Installation

Ceramic tile installation is usually left to the pros. That often is a good idea too because there are quite a few tricks to laying ceramic tile. But people having been installing tile for many hundreds of years. Tile setting isn't exactly rocket science. If you get the general idea right, most anyone can complete a tile project.

Tile installing is mostly the same no matter what the project. If you can lay floor tile, you can set wall tile or tile a counter top for that matter. The really trickiest project is building a ceramic tile shower pan. But even that just requires an understanding of a few tricks. Getting started on a tile project just requires getting the basics done right.

Often the first stumbling point is the base itself. The surface on which the tile is laid must be right. Now there are many surfaces that are a fine base for tile. Why you can even lay tile over tile itself. But whatever the base, it must be solid. That means no moving around is allowed. If the base moves, the tile or grout will crack. So a solid foundation is the place to start a tile project. Once you have a solid base you can lay that first tile.

Before the first tile gets set though, do some careful measuring and marking. Decide where you want the tiles that will be cut so they are least visible. That may determine where the first tile goes. Then you'll want a way to mark lines to guide you in setting the tiles. Straight tile joints are key to a professional installation. Get the tile started right and half the job is done.

Pros hurry because time is money, but you can take your time. With care you can carefully align tiles and get an installation that's straight and level. It just takes time and care to put each tile in exactly the right place. There are quite a few tricks for cutting tile and getting the spacing just right. Plus there are several tricks to help you keep tiles aligned just right.

Ceramic tile installing may be a project that you want to do. With the right tools and some instruction, you can install tile like a pro. Tile installation depends on getting a few basic steps right. Get the basics right and the only thing separating you from a pro is speed. If you can learn a few tricks even the speed will come with practice.

Get access to video tutorials showing the professional tricks of ceramic tile installation on our ceramic tile website.

Al Bullington invites you to visit http://InstallingCeramicTile.net for answers to your tile questions.

Major Remodel and Home Additions

Whether you are planning to do a major remodel or you want to do a major home addition, there are going to be so many different things to keep in mind. After all, many people don't realize what they are getting into when they start a room addition or a remodeling addition to their home. You'll find that there is much to think about before you get started and as the addition or remodel occurs. There are quite a few concerns, you have the remodel or home addition cost to think about, and there are various issues that can crop up. So, it's important that you know about these things before you get started. Here's a closer look at the costs associated with a remodel or home addition, some of the top concerns when you are remodeling in your home, and a few remodeling and addition issues that you'll need to keep in mind.

The Costs of a Major Remodel or Home Addition
First of all, when it comes to a home addition or even a major remodel on your home, you'll find that there are a variety of different costs. It's best to find out about them up front rather than to be shocked about them in the future. If you are going to have someone design the addition or remodel, then you'll have to pay for the designing. Permits to do the house addition are also going to cost you once the project has been appraised. Site preparation, foundation work, plumbing, electrical work, and cooling and cooling are all going to cost as well. Don't forget you'll have to pay for sheet rock, shingles for the roof, siding, flooring, and more. Of course the windows, doors, appliances, fixtures, and the finish work is going to cost you too. So, as you can see, there are definitely some major costs that you'll need to be aware of.

Top Concerns When Remodeling
When it comes to a remodel addition, there are many concerns that you should be keeping in mind as well. Here are some of the top concerns that you'll need to have when you are going to add a new addition or a remodel to your home.

- The Cost - Of course as mentioned, the cost of the home addition is definitely going to be a concern. In fact, many people find out that the addition they wanted ends up costing them so much more than they ever planned on. This is why it's important to take care of this concern by coming up with a budget that you can stick to when you are doing this type of home project.

- Finding the Right Contractor - Another important concern to keep in mind is finding the right contractor for your needs. You need to insure that you get a quality remodeling or addition contractor that can help you complete your project. Of course there are many things to consider when it comes to picking out a great contractor. Insurance, license, experience, and price are all important things that you should be considering.

- Environmental Concerns - Environmental concerns should also be kept in mind when you are getting ready to do an addition to home. Whether it is a small addition or a large room addition, you want to consider how you are going to affect the environment of your home with the addition that you want for your home.

- Integrity of the Structure - The integrity of the structure should also be kept in mind when it comes to home additions as well. You want to ensure that nothing is done to the home that is going to cause a problem with the structure of the existing home.

Remodeling and Addition Issues
Whether you are doing a remodel or an addition in the Twin Cities, there are several different issues to keep in mind that you will definitely need to consider. Make sure that you consider these issues carefully no matter whether you are doing a small addition or a remodel on your home.

- Plenty of Storage Space - Make sure that you have plenty of storage space. This can be a major issue whether doing a remodel or an addition. If you don't have enough storage space, you are going to regret this in the future. So you should take careful measures to ensure that you have enough space to provide excellent storage for you.

- Adequate Floor Space - Adequate floor space is another issue that you should keep in mind when it comes to your home design. No doubt you want to make the best out of the floor space that you have if you are doing a remodeling project. However, if you are doing a home addition, you'll want to make sure that you design in enough space for your needs.

- Having the Needed Permits - Last of all, the needed permits for building home addition is going to be imperative. Without the right permits, you could end up getting fined. So, do your research. Find out what kind of permits you are going to need to complete the project.

If you are looking to obtain mortgage financing for a remodel of a home or second home in Minnesota, please vist our Minnesota mortgage brokerage at http://www.VentureLoanApp.com John Mazzara is involved with financial services in the Twin Cities, MN. Officing out of Edina, Minnesota-John is centrally located within the 7 county MN metropolitan area. John owns three separate businesses-a licensed real estate broker associate selling Minnesota real estate since 1986-affiliated with RE/MAX Associates Plus http://www.MinneapolisStPaulHomes.com , an independent CFP-certified financial planner since 1989 with an independent Minnesota financial planning firm-Financial Planning Associates and the owner of a Minnesota mortgage broker firm-Venture Development Inc-specializing in residential, commercial and investment mortgages for purchases of single family homes, investment properties and commercial property. Venture brokers FHA, VA, Conventional loans and lines of credit. If you are looking for someone to help you in the areas of real estate sales/purchase, mortgages, or and/or financial planning and insurance you should call John for a free 1 hour consultation to see if he can meet your needs. 952-929-2577. RE/MAX Associates Plus and Venture Development are located at 7300 France Ave S, Suite 410, Edina, MN 55435

Solar Panels For the Home Reduces the Homeowner's Energy Cost

Solar energy is a great renewable resource that is growing in popularity with the average consumer. As energy prices skyrocket and the average income stagnating, if not falling, consumers are looking for a way to reduce their costs of living in any area possible. The rise of renewable energy, and the desire to wean our society off of fossil fuels, makes using solar panels for the home a great alternative for power.

Solar power kits save energy for the homeowner because they allow the homeowner to generate their own electricity to power their home. In some cases, the homeowner can go completely off-grid and even sell additional electricity back to the power company. What a powerful concept to be able to take an expense and turn it into an asset.

What are solar panels?

A solar panel is a packaged interconnected assembly of solar cells that are cased in a housing unit to protect the cells from the weather and from physical damage. These panels generate electricity, which is then used to directly power devices in the home, or charge battery cells to store the power for nighttime use. A solar power kit typically includes solar panels, an inverter and interconnection wiring to connect the panel to the electrical system in the home. For those that want to live off the grid, batteries are included for continuous power during the day and night. The use of infrared solar cells also allows the homeowner to generate electricity at night, thus increasing the efficiency of these cells.

The technology of solar cells continues to advance with time. Currently, the efficiency rate of solar cells range from 5% to 19% depending upon the technology. The reason is that the solar cells (or photo-voltaic cells) only convert a limited range of sunlight frequencies into electricity. The renewable energy industry is experimenting with advanced technologies that will raise the efficiency of these solar cells by a whopping 50%.

A new technology for solar cells, also called thin film or third generation solar cells, is being researched. The benefit of this new generation is that they have a higher efficiency and they cost less. These brands are both rigid and flexible thin film modules. The differences between the rigid thin film module and the flexible thin film module are due to differences in the materials that are used to make the modules and differences in the production of the modules.

Solar modules can last anywhere from 10 to 25 years while still operating at 80% of their original capacity. Every year the number of panels sold to consumers continues to grow. In 2007 over 4 million solar units were sold. There are a number of manufacturers that produce solar panels for consumer use, however the average consumer can create their own solar panels using materials from their local hardware store.

Solar panels for the home can provide renewable energy for the consumer. The initial costs can range greatly if the consumer chooses to build their own solar energy kit or have another company install a solar power kit. As the technology improves, the homeowner will have more options available to them to completely power their home with renewable solar power energy.

Discover how you can power your home with solar energy for under $200. You only have to have the right information. The reviews on these popular DIY solar panel info guides that show you how to create solar panels for home, will help you make an informed decision. Get more information on solar power and solar energy at this solar power resource page